How To Reset Anti Theft System Ford Focus
How to reset anti theft system ford focus. In this Video I explain how to reset the Anti-Theft System on Fourth Generation Ford MustangAbout Us. Do this without moving it away from that unlock position for about 30 seconds. The system may not be recognizing your keys key-less entry signal or there may be a fault in the anti-theft module or wiring.
One way is to put the physical key in the lock and then turn it to the unlock position. There is a reset procedure to stop this anti-theft light flashingmany a times this helps The reset procedure is as follows-- Reset the alarm by locking and unlocking the drivers side doorDo this a couple of times and then check it will reset the factory security system. You can try and use your spare key if you havent already to see if it starts.
Repeat the process at least a couple of times if it does not work the first time. Do this without moving it away from that unlock position for about 30 seconds. Do this without moving it away from that unlock position for about 30 seconds.
How do you reset the anti-theft system on a Ford Focus. How do you reset the anti-theft on a 2011 Ford Fusion. If your old key does not fit in the new lock cylinder you will have to swap them the RFID tag can be removed by pulling out the rubber tab on.
If the anti-theft continues to flash when trying to start the car then either there is a failure in the system causing the key to be unrecognizable or the chip in the key has become damaged. Systems B C and E have an anti-scan function. This gives the system time to reset or you wont be able to start your car.
Find the anti-theft alarm wire. Pull out your fuse box and remove the anti-theft fuse. Cut the wire and wrap it in electrical tape.
All you need is the key to the vehicle for this process. If it is not lit up anymore turn the key back to off and leave it for a couple of minutes.
Cut the wire and wrap it in electrical tape.
Pull out your fuse box and remove the anti-theft fuse. I dont know if u have already done this but try disconnecting the battery bearing in mind u may have to reset your radio code. There are a few possible ways to reset the Ford Focus anti-theft security system. Check the anti-theft light again. One way is to put the physical key in the lock and then turn it to the unlock position. By rolling the window down youre making sure you still have access to the car in case the car locks you out. This should permanently disable your PATS system and possibly void your warranty. Lock your car and activate the SecuriLock system by pressing the Lock button twice on your key fob. This will trigger a reset of the system.
One way is to put the physical key in the lock and then turn it to the unlock position. The system may not be recognizing your keys key-less entry signal or there may be a fault in the anti-theft module or wiring. Do this without moving it away from that unlock position for about 30 seconds. There is a reset procedure to stop this anti-theft light flashingmany a times this helps The reset procedure is as follows-- Reset the alarm by locking and unlocking the drivers side doorDo this a couple of times and then check it will reset the factory security system. Check the anti-theft light again. You will need to have it scanned to check for fault codes. Systems B C and E have an anti-scan function.
Post a Comment for "How To Reset Anti Theft System Ford Focus"